Section 15.4.2.1 — Install per manufacturer instructions; comply with NFPA 72.
Reference ASTM E84; flame spread index ≤ 25, smoke developed ≤ 50.
Division 22 — Plumbing: materials per NSF/ANSI 61 where applicable.
Section 23 05 00 — HVAC general; coordinate with structural and electrical.
Per ASHRAE 90.1-2019; minimum efficiency per tables 6.8.1A through 6.8.1K.
UFC 3-410-01; mechanical systems shall meet energy conservation criteria.
Ductwork per SMACNA HVAC Duct Construction Standards, current edition.
Section 22 40 00 — Plumbing fixtures; supply per Division 21 drawings.
Fire alarm per NFPA 72; initiating devices per specification Section 28 31 00.
Section 26 05 00 — Basic electrical materials; verify compatibility with existing.
Conduit per NEC Article 358; support spacing per Table 352.30.
Section 09 91 00 — Painting; substrate preparation per SSPC-SP 5 where noted.
Roofing per FM Approvals 1-90; attachment per manufacturer and structural.
Section 07 41 00 — Roof panels; clips and fasteners per approved submittals.
Section 03 30 00 — Cast-in-place concrete; curing per ACI 308.
Reinforcement per ASTM A615 Grade 60; lap lengths per ACI 318.
Section 05 50 00 — Metal fabrications; galvanizing per ASTM A123.
Section 08 41 00 — Entrances; hardware group per Division 08 schedule.
Glazing per ASTM E2190; insulating units per IGCC where applicable.
Section 09 65 00 — Resilient flooring; adhesive per manufacturer and substrate.
Section 09 68 00 — Carpet; fiber and backing per specification and fire rating.
Section 09 77 00 — Wall coverings; Class A per ASTM E84 where required.
Section 21 05 00 — Fire suppression; piping per NFPA 13 and approved drawings.
Section 27 05 00 — Communications backbone; pathway per TIA-942.
Section 31 23 00 — Excavation; sheeting and shoring per geotechnical report.
Section 32 12 00 — Flexible pavement; aggregate base per ASTM D2940.
Section 33 41 00 — Water distribution; valves per AWWA C509.
Section 40 05 00 — Process piping; materials per process flow diagrams.
Section 15.4.2.1 — Install per manufacturer instructions; comply with NFPA 72.
Reference ASTM E84; flame spread index ≤ 25, smoke developed ≤ 50.
Division 22 — Plumbing: materials per NSF/ANSI 61 where applicable.
Section 23 05 00 — HVAC general; coordinate with structural and electrical.
Per ASHRAE 90.1-2019; minimum efficiency per tables 6.8.1A through 6.8.1K.
UFC 3-410-01; mechanical systems shall meet energy conservation criteria.
Ductwork per SMACNA HVAC Duct Construction Standards, current edition.
Section 22 40 00 — Plumbing fixtures; supply per Division 21 drawings.
Fire alarm per NFPA 72; initiating devices per specification Section 28 31 00.
Section 26 05 00 — Basic electrical materials; verify compatibility with existing.
Conduit per NEC Article 358; support spacing per Table 352.30.
Section 09 91 00 — Painting; substrate preparation per SSPC-SP 5 where noted.
Roofing per FM Approvals 1-90; attachment per manufacturer and structural.
Section 07 41 00 — Roof panels; clips and fasteners per approved submittals.
Section 03 30 00 — Cast-in-place concrete; curing per ACI 308.
Reinforcement per ASTM A615 Grade 60; lap lengths per ACI 318.
Section 05 50 00 — Metal fabrications; galvanizing per ASTM A123.
Section 08 41 00 — Entrances; hardware group per Division 08 schedule.
Glazing per ASTM E2190; insulating units per IGCC where applicable.
Section 09 65 00 — Resilient flooring; adhesive per manufacturer and substrate.
Section 09 68 00 — Carpet; fiber and backing per specification and fire rating.
Section 09 77 00 — Wall coverings; Class A per ASTM E84 where required.
Section 21 05 00 — Fire suppression; piping per NFPA 13 and approved drawings.
Section 27 05 00 — Communications backbone; pathway per TIA-942.
Section 31 23 00 — Excavation; sheeting and shoring per geotechnical report.
Section 32 12 00 — Flexible pavement; aggregate base per ASTM D2940.
Section 33 41 00 — Water distribution; valves per AWWA C509.
Section 40 05 00 — Process piping; materials per process flow diagrams.
Section 15.4.2.1 — Install per manufacturer instructions; comply with NFPA 72.
Reference ASTM E84; flame spread index ≤ 25, smoke developed ≤ 50.
Division 22 — Plumbing: materials per NSF/ANSI 61 where applicable.
Section 23 05 00 — HVAC general; coordinate with structural and electrical.
Per ASHRAE 90.1-2019; minimum efficiency per tables 6.8.1A through 6.8.1K.
UFC 3-410-01; mechanical systems shall meet energy conservation criteria.
Ductwork per SMACNA HVAC Duct Construction Standards, current edition.
Section 22 40 00 — Plumbing fixtures; supply per Division 21 drawings.
Fire alarm per NFPA 72; initiating devices per specification Section 28 31 00.
Section 26 05 00 — Basic electrical materials; verify compatibility with existing.
Conduit per NEC Article 358; support spacing per Table 352.30.
Section 09 91 00 — Painting; substrate preparation per SSPC-SP 5 where noted.
Roofing per FM Approvals 1-90; attachment per manufacturer and structural.
Section 07 41 00 — Roof panels; clips and fasteners per approved submittals.
Section 03 30 00 — Cast-in-place concrete; curing per ACI 308.
Reinforcement per ASTM A615 Grade 60; lap lengths per ACI 318.
Section 05 50 00 — Metal fabrications; galvanizing per ASTM A123.
Section 08 41 00 — Entrances; hardware group per Division 08 schedule.
Glazing per ASTM E2190; insulating units per IGCC where applicable.
Section 09 65 00 — Resilient flooring; adhesive per manufacturer and substrate.
Section 09 68 00 — Carpet; fiber and backing per specification and fire rating.
Section 09 77 00 — Wall coverings; Class A per ASTM E84 where required.
Section 21 05 00 — Fire suppression; piping per NFPA 13 and approved drawings.
Section 27 05 00 — Communications backbone; pathway per TIA-942.
Section 31 23 00 — Excavation; sheeting and shoring per geotechnical report.
Section 32 12 00 — Flexible pavement; aggregate base per ASTM D2940.
Section 33 41 00 — Water distribution; valves per AWWA C509.
Section 40 05 00 — Process piping; materials per process flow diagrams.
Section 15.4.2.1 — Install per manufacturer instructions; comply with NFPA 72.
Reference ASTM E84; flame spread index ≤ 25, smoke developed ≤ 50.
Division 22 — Plumbing: materials per NSF/ANSI 61 where applicable.
Section 23 05 00 — HVAC general; coordinate with structural and electrical.
Per ASHRAE 90.1-2019; minimum efficiency per tables 6.8.1A through 6.8.1K.
UFC 3-410-01; mechanical systems shall meet energy conservation criteria.
Ductwork per SMACNA HVAC Duct Construction Standards, current edition.
Section 22 40 00 — Plumbing fixtures; supply per Division 21 drawings.
Fire alarm per NFPA 72; initiating devices per specification Section 28 31 00.
Section 26 05 00 — Basic electrical materials; verify compatibility with existing.
Conduit per NEC Article 358; support spacing per Table 352.30.
Section 09 91 00 — Painting; substrate preparation per SSPC-SP 5 where noted.
Roofing per FM Approvals 1-90; attachment per manufacturer and structural.
Section 07 41 00 — Roof panels; clips and fasteners per approved submittals.
Section 03 30 00 — Cast-in-place concrete; curing per ACI 308.
Reinforcement per ASTM A615 Grade 60; lap lengths per ACI 318.
Section 05 50 00 — Metal fabrications; galvanizing per ASTM A123.
Section 08 41 00 — Entrances; hardware group per Division 08 schedule.
Glazing per ASTM E2190; insulating units per IGCC where applicable.
Section 09 65 00 — Resilient flooring; adhesive per manufacturer and substrate.
Section 09 68 00 — Carpet; fiber and backing per specification and fire rating.
Section 09 77 00 — Wall coverings; Class A per ASTM E84 where required.
Section 21 05 00 — Fire suppression; piping per NFPA 13 and approved drawings.
Section 27 05 00 — Communications backbone; pathway per TIA-942.
Section 31 23 00 — Excavation; sheeting and shoring per geotechnical report.
Section 32 12 00 — Flexible pavement; aggregate base per ASTM D2940.
Section 33 41 00 — Water distribution; valves per AWWA C509.
Section 40 05 00 — Process piping; materials per process flow diagrams.
Section 15.4.2.1 — Install per manufacturer instructions; comply with NFPA 72.
Reference ASTM E84; flame spread index ≤ 25, smoke developed ≤ 50.
Division 22 — Plumbing: materials per NSF/ANSI 61 where applicable.
Section 23 05 00 — HVAC general; coordinate with structural and electrical.
Per ASHRAE 90.1-2019; minimum efficiency per tables 6.8.1A through 6.8.1K.
UFC 3-410-01; mechanical systems shall meet energy conservation criteria.
Ductwork per SMACNA HVAC Duct Construction Standards, current edition.
Section 22 40 00 — Plumbing fixtures; supply per Division 21 drawings.
Fire alarm per NFPA 72; initiating devices per specification Section 28 31 00.
Section 26 05 00 — Basic electrical materials; verify compatibility with existing.
Conduit per NEC Article 358; support spacing per Table 352.30.
Section 09 91 00 — Painting; substrate preparation per SSPC-SP 5 where noted.
Roofing per FM Approvals 1-90; attachment per manufacturer and structural.
Section 07 41 00 — Roof panels; clips and fasteners per approved submittals.
Section 03 30 00 — Cast-in-place concrete; curing per ACI 308.
Reinforcement per ASTM A615 Grade 60; lap lengths per ACI 318.
Section 05 50 00 — Metal fabrications; galvanizing per ASTM A123.
Section 08 41 00 — Entrances; hardware group per Division 08 schedule.
Glazing per ASTM E2190; insulating units per IGCC where applicable.
Section 09 65 00 — Resilient flooring; adhesive per manufacturer and substrate.
Section 09 68 00 — Carpet; fiber and backing per specification and fire rating.
Section 09 77 00 — Wall coverings; Class A per ASTM E84 where required.
Section 21 05 00 — Fire suppression; piping per NFPA 13 and approved drawings.
Section 27 05 00 — Communications backbone; pathway per TIA-942.
Section 31 23 00 — Excavation; sheeting and shoring per geotechnical report.
Section 32 12 00 — Flexible pavement; aggregate base per ASTM D2940.
Section 33 41 00 — Water distribution; valves per AWWA C509.
Section 40 05 00 — Process piping; materials per process flow diagrams.
Section 15.4.2.1 — Install per manufacturer instructions; comply with NFPA 72.
Reference ASTM E84; flame spread index ≤ 25, smoke developed ≤ 50.
Division 22 — Plumbing: materials per NSF/ANSI 61 where applicable.
Section 23 05 00 — HVAC general; coordinate with structural and electrical.
Per ASHRAE 90.1-2019; minimum efficiency per tables 6.8.1A through 6.8.1K.
UFC 3-410-01; mechanical systems shall meet energy conservation criteria.
Ductwork per SMACNA HVAC Duct Construction Standards, current edition.
Section 22 40 00 — Plumbing fixtures; supply per Division 21 drawings.
Fire alarm per NFPA 72; initiating devices per specification Section 28 31 00.
Section 26 05 00 — Basic electrical materials; verify compatibility with existing.
Conduit per NEC Article 358; support spacing per Table 352.30.
Section 09 91 00 — Painting; substrate preparation per SSPC-SP 5 where noted.
Roofing per FM Approvals 1-90; attachment per manufacturer and structural.
Section 07 41 00 — Roof panels; clips and fasteners per approved submittals.
Section 03 30 00 — Cast-in-place concrete; curing per ACI 308.
Reinforcement per ASTM A615 Grade 60; lap lengths per ACI 318.
Section 05 50 00 — Metal fabrications; galvanizing per ASTM A123.
Section 08 41 00 — Entrances; hardware group per Division 08 schedule.
Glazing per ASTM E2190; insulating units per IGCC where applicable.
Section 09 65 00 — Resilient flooring; adhesive per manufacturer and substrate.
Section 09 68 00 — Carpet; fiber and backing per specification and fire rating.
Section 09 77 00 — Wall coverings; Class A per ASTM E84 where required.
Section 21 05 00 — Fire suppression; piping per NFPA 13 and approved drawings.
Section 27 05 00 — Communications backbone; pathway per TIA-942.
Section 31 23 00 — Excavation; sheeting and shoring per geotechnical report.
Section 32 12 00 — Flexible pavement; aggregate base per ASTM D2940.
Section 33 41 00 — Water distribution; valves per AWWA C509.
Section 40 05 00 — Process piping; materials per process flow diagrams.
Section 15.4.2.1 — Install per manufacturer instructions; comply with NFPA 72.
Reference ASTM E84; flame spread index ≤ 25, smoke developed ≤ 50.
Division 22 — Plumbing: materials per NSF/ANSI 61 where applicable.
Section 23 05 00 — HVAC general; coordinate with structural and electrical.
Per ASHRAE 90.1-2019; minimum efficiency per tables 6.8.1A through 6.8.1K.
UFC 3-410-01; mechanical systems shall meet energy conservation criteria.
Ductwork per SMACNA HVAC Duct Construction Standards, current edition.
Section 22 40 00 — Plumbing fixtures; supply per Division 21 drawings.
Fire alarm per NFPA 72; initiating devices per specification Section 28 31 00.
Section 26 05 00 — Basic electrical materials; verify compatibility with existing.
Conduit per NEC Article 358; support spacing per Table 352.30.
Section 09 91 00 — Painting; substrate preparation per SSPC-SP 5 where noted.
Roofing per FM Approvals 1-90; attachment per manufacturer and structural.
Section 07 41 00 — Roof panels; clips and fasteners per approved submittals.
Section 03 30 00 — Cast-in-place concrete; curing per ACI 308.
Reinforcement per ASTM A615 Grade 60; lap lengths per ACI 318.
Section 05 50 00 — Metal fabrications; galvanizing per ASTM A123.
Section 08 41 00 — Entrances; hardware group per Division 08 schedule.
Glazing per ASTM E2190; insulating units per IGCC where applicable.
Section 09 65 00 — Resilient flooring; adhesive per manufacturer and substrate.
Section 09 68 00 — Carpet; fiber and backing per specification and fire rating.
Section 09 77 00 — Wall coverings; Class A per ASTM E84 where required.
Section 21 05 00 — Fire suppression; piping per NFPA 13 and approved drawings.
Section 27 05 00 — Communications backbone; pathway per TIA-942.
Section 31 23 00 — Excavation; sheeting and shoring per geotechnical report.
Section 32 12 00 — Flexible pavement; aggregate base per ASTM D2940.
Section 33 41 00 — Water distribution; valves per AWWA C509.
Section 40 05 00 — Process piping; materials per process flow diagrams.
Section 15.4.2.1 — Install per manufacturer instructions; comply with NFPA 72.
Reference ASTM E84; flame spread index ≤ 25, smoke developed ≤ 50.
Division 22 — Plumbing: materials per NSF/ANSI 61 where applicable.
Section 23 05 00 — HVAC general; coordinate with structural and electrical.
Per ASHRAE 90.1-2019; minimum efficiency per tables 6.8.1A through 6.8.1K.
UFC 3-410-01; mechanical systems shall meet energy conservation criteria.
Ductwork per SMACNA HVAC Duct Construction Standards, current edition.
Section 22 40 00 — Plumbing fixtures; supply per Division 21 drawings.
Fire alarm per NFPA 72; initiating devices per specification Section 28 31 00.
Section 26 05 00 — Basic electrical materials; verify compatibility with existing.
Conduit per NEC Article 358; support spacing per Table 352.30.
Section 09 91 00 — Painting; substrate preparation per SSPC-SP 5 where noted.
Roofing per FM Approvals 1-90; attachment per manufacturer and structural.
Section 07 41 00 — Roof panels; clips and fasteners per approved submittals.
Section 03 30 00 — Cast-in-place concrete; curing per ACI 308.
Reinforcement per ASTM A615 Grade 60; lap lengths per ACI 318.
Section 05 50 00 — Metal fabrications; galvanizing per ASTM A123.
Section 08 41 00 — Entrances; hardware group per Division 08 schedule.
Glazing per ASTM E2190; insulating units per IGCC where applicable.
Section 09 65 00 — Resilient flooring; adhesive per manufacturer and substrate.
Section 09 68 00 — Carpet; fiber and backing per specification and fire rating.
Section 09 77 00 — Wall coverings; Class A per ASTM E84 where required.
Section 21 05 00 — Fire suppression; piping per NFPA 13 and approved drawings.
Section 27 05 00 — Communications backbone; pathway per TIA-942.
Section 31 23 00 — Excavation; sheeting and shoring per geotechnical report.
Section 32 12 00 — Flexible pavement; aggregate base per ASTM D2940.
Section 33 41 00 — Water distribution; valves per AWWA C509.
Section 40 05 00 — Process piping; materials per process flow diagrams.
Section 15.4.2.1 — Install per manufacturer instructions; comply with NFPA 72.
Reference ASTM E84; flame spread index ≤ 25, smoke developed ≤ 50.
Division 22 — Plumbing: materials per NSF/ANSI 61 where applicable.
Section 23 05 00 — HVAC general; coordinate with structural and electrical.
Per ASHRAE 90.1-2019; minimum efficiency per tables 6.8.1A through 6.8.1K.
UFC 3-410-01; mechanical systems shall meet energy conservation criteria.
Ductwork per SMACNA HVAC Duct Construction Standards, current edition.
Section 22 40 00 — Plumbing fixtures; supply per Division 21 drawings.
Fire alarm per NFPA 72; initiating devices per specification Section 28 31 00.
Section 26 05 00 — Basic electrical materials; verify compatibility with existing.
Conduit per NEC Article 358; support spacing per Table 352.30.
Section 09 91 00 — Painting; substrate preparation per SSPC-SP 5 where noted.
Roofing per FM Approvals 1-90; attachment per manufacturer and structural.
Section 07 41 00 — Roof panels; clips and fasteners per approved submittals.
Section 03 30 00 — Cast-in-place concrete; curing per ACI 308.
Reinforcement per ASTM A615 Grade 60; lap lengths per ACI 318.
Section 05 50 00 — Metal fabrications; galvanizing per ASTM A123.
Section 08 41 00 — Entrances; hardware group per Division 08 schedule.
Glazing per ASTM E2190; insulating units per IGCC where applicable.
Section 09 65 00 — Resilient flooring; adhesive per manufacturer and substrate.
Section 09 68 00 — Carpet; fiber and backing per specification and fire rating.
Section 09 77 00 — Wall coverings; Class A per ASTM E84 where required.
Section 21 05 00 — Fire suppression; piping per NFPA 13 and approved drawings.
Section 27 05 00 — Communications backbone; pathway per TIA-942.
Section 31 23 00 — Excavation; sheeting and shoring per geotechnical report.
Section 32 12 00 — Flexible pavement; aggregate base per ASTM D2940.
Section 33 41 00 — Water distribution; valves per AWWA C509.
Section 40 05 00 — Process piping; materials per process flow diagrams.
Section 15.4.2.1 — Install per manufacturer instructions; comply with NFPA 72.
Reference ASTM E84; flame spread index ≤ 25, smoke developed ≤ 50.
Division 22 — Plumbing: materials per NSF/ANSI 61 where applicable.
Section 23 05 00 — HVAC general; coordinate with structural and electrical.
Per ASHRAE 90.1-2019; minimum efficiency per tables 6.8.1A through 6.8.1K.
UFC 3-410-01; mechanical systems shall meet energy conservation criteria.
Ductwork per SMACNA HVAC Duct Construction Standards, current edition.
Section 22 40 00 — Plumbing fixtures; supply per Division 21 drawings.
Fire alarm per NFPA 72; initiating devices per specification Section 28 31 00.
Section 26 05 00 — Basic electrical materials; verify compatibility with existing.
Conduit per NEC Article 358; support spacing per Table 352.30.
Section 09 91 00 — Painting; substrate preparation per SSPC-SP 5 where noted.
Roofing per FM Approvals 1-90; attachment per manufacturer and structural.
Section 07 41 00 — Roof panels; clips and fasteners per approved submittals.
Section 03 30 00 — Cast-in-place concrete; curing per ACI 308.
Reinforcement per ASTM A615 Grade 60; lap lengths per ACI 318.
Section 05 50 00 — Metal fabrications; galvanizing per ASTM A123.
Section 08 41 00 — Entrances; hardware group per Division 08 schedule.
Glazing per ASTM E2190; insulating units per IGCC where applicable.
Section 09 65 00 — Resilient flooring; adhesive per manufacturer and substrate.
Section 09 68 00 — Carpet; fiber and backing per specification and fire rating.
Section 09 77 00 — Wall coverings; Class A per ASTM E84 where required.
Section 21 05 00 — Fire suppression; piping per NFPA 13 and approved drawings.
Section 27 05 00 — Communications backbone; pathway per TIA-942.
Section 31 23 00 — Excavation; sheeting and shoring per geotechnical report.
Section 32 12 00 — Flexible pavement; aggregate base per ASTM D2940.
Section 33 41 00 — Water distribution; valves per AWWA C509.
Section 40 05 00 — Process piping; materials per process flow diagrams.

Thousands of pages.
One clear plan.

We turn your spec book and drawings into field-ready install rules — traced to the source — in minutes.

Request a DemoSee how it works
Stack of spec book pages — technical manuals and construction documents
Digital Install Packet — field-ready install rules and acceptance criteria

Quality planning is broken on every project.

Inconsistent taxonomy

Every QC manager builds checklists differently: no shared language, no enforced schema. You can't trend what you can't define, and no two jobs ever look the same.

Field crews work with ambiguity by default

Specs and manuals are too dense to use on the fly. Crews often start an install without knowing what “right” looks like because no one gave them a clear standard. Manually turning that into field guidance is too slow for every project.

Rules go stale mid-project

An RFI or submittal changes the requirement, but the checklist the crew is using doesn't know that. Work gets done to the old standard. It gets caught at punch, or not at all.

The result: rework, risk, and no single source of truth.

Here's how we improved the workflow.

Structured like a real project.

One workspace per job, organized by CSI division and assembly type. Assign each scope to a trade, filter by type or reviewer, and give every assembly its own Digital Install Packet (DIP). Accountability is clear before work starts.

QA/QC project overview — assemblies, pending approvals, pipeline status, and view rules
Structured quality rules — plain language, measurable parameters, traceability, and visual examples

Specific enough for anyone in the field.

AI ingests your spec book, drawings, referenced standards, and manufacturer manuals, then turns each requirement into a rule tied to its source. Rules are written in plain language with measurable parameters, presence/absence checks, and traceability. QA managers review and approve each rule set before release, and every change is tracked and versioned.

Organized, approvable, and distributable.

Each assembly gets a DIP with its rules, visuals, evidence, trade assignment, and reviewer chain. QA approves each DIP before it goes to the field, and spec updates propagate so the field always has the current standard. Export by assembly or by CSI division as PDF, or have trades log in and view their packets on an iPad.

Digital Install Packet — rules, visuals, evidence, trade assignment, and reviewer chain

Three steps.

Creating a field-ready quality plan has never been easier.

Upload project documents
Review and configure quality plan
Get it to the field

1 Upload your project docs

Drop in your spec book, drawings, and any other project documents. AI agents parse every spec section and reference so no requirement is left unstructured.

2 Review and configure

Your QA manager reviews the extracted rules per assembly, assigns each to the responsible trade contractor, and sets the reviewer chain for each DIP. All changes are tracked and versioned.

3 Get it to the field

Trade contractors and field crews log in and view their assigned DIPs on an iPad. Or the QA team exports clean PDFs by assembly or full CSI division.

Now accepting pilot partners

We're running pilots with a small group of GCs right now.

We're in early pilots with commercial GCs and want to work through your actual project docs together. If quality planning is a pain point on your jobs, we'd like to talk.

Ready to see it on your project?
We'll walk through your actual spec and show you what gets generated.
Book a 30-Minute Call
Pilot access is free.